PPE- Foshan Perseverance Precision Equipment limited company, is a collection of R &D, manufacturing, and sales for aluminum and steel beverage can process equipments. Our professional team of designers, drafters, project managers, and fabricators are equipped to provide facility designs, concept layouts, oven thermal flow simulation, equipment structure design, and fabrication of equipments.
PPE Washer System has been re-engineered and improved to optimize process control, ease of installation, operation and maintenance. ? And Our system also includes a highly efficient Dry-off Oven, achieving a 95% recirculation rate.
PPE Pin Oven utilizes a unique recirculation system, allowing less passes to cure inks than competing ovens.
PPE IBO provides customers with a minimal investment combined with ongoing energy saving technology. Burn households using the latest air knife design, drying faster, energy-saving effect is obvious.
the PPE Coolant filtration system utilizes two pressure vessels for the filtering process. When the active vessel becomes full of contaminant the system automatically diverts flow to the inactive filter which is waiting with clean filter media.
PPE Foshan offers a wide range of conveying options. PPE Foshan will equip your conveying with any mat you choose.
PPE also provide the retrofit and repair service for your exist machines, such as intergrate water conservation system to can washers, and retrofit the ovens.
Customer requirement is always No.1. Taking the market as the guidance, scientific and technological innovation as the backing, PPE collected a batch of high-level, high-quality professionals, design and manufacture of the products reached the international advanced level.
]]>Oven air knife add single point High adjustment
http://www.aznewhomerebate.com/wp-content/uploads/2018/04/air%20knife.mp4
]]>
operator assistance, this system utilizes 2-way pneumatic valves on both filters.
This system is pre-assembled and will be ready to run upon delivery. All that is
needed on site in order for this system to work properly is a source of compressed
air to connect to the pneumatic manifold. The pneumatic manifold can be seen in
figure 4.5.
Once compressed air has been supplied to the pneumatic valves, have an
operator check to make sure all air tubes are securely in place and there are no
leaks. Once this has been done, the pneumatic valve system is ready for
operation.
or unemulsified free oils from the surface of the “dirty” coolant tank.
This system incorporates two electrically powered squeegee rollers
capable of pulling up to 30 feet of “mop”, and achieving oil recovery rates of up
to 100 gallons/hour. The variable speed controller allows infinite adjustment of
Mop speed to achieve optimum purity of recovered product.
A single loop of attracting “mop” drops from the mop engine, travels
across the surface of the area to be skimmed, then is pulled back to the mop
engine where the oil is squeezed from the “mop” and manually collected.
A. The operator will be notified when the blow down process is complete and it
is ok to remove the cover and change out the filter media by a “waiting for
change” notification on the HMI screen
B. Remove the cover on the inactive filter
C. Remove the locking device located on top of each filter cartridge
D. Remove each filter cartridge from its positioning rod and replace it with a
new filter cartridge
E. Reattach the locking device on top of each cartridge. Make sure each
cartridge is securely in place
F. Replace the cover on the filter housing.
Note: When bolting the cover down, do not tighten one bolt and move
on to the next bolt in a clockwise or counter clockwise fashion.
Tighten one bolt and then tighten the bolt 180° opposite to the bolt
which was just tightened. Follow this process until each bolt is
firmly tightened and the cover is securely in place
NOTICE
SYSTEM WILL NOT DETECT IF COVER IS FASTENED
SECURELY. OPERATOR MUST BE CERTAIN COVER IS
PROPERLY BOLTED DOWN.
PPE Chemical absorption tower has a great success in meeting the national discharge standard, it removes odour and improves the environment. the technology is mature and reliable. It has the advantages of convenient installation and maintenance, auto make-up and operation, low operating costs, high efficiency.
The dual pressure vessels work in conjunction by equally sharing filtration duties. When the active vessel becomes full of contaminant the system automatically diverts flow to the inactive filter which is waiting with clean filter media.
The pressure vessel design eliminates down time associated with filter changes and significantly reduces operator input.
Major can makers currently running the PPE Foshan Coolant Filtration System:
- Rexam PLC
? Crown Holdings
? Ball Corporation
? Pacific Can Company (PCC)
DCF
]]>
PPE has many skilled mechanics for washer and oven. We collaborate with domestic and foreign senior engineers in two cans making. PPE can provide the best cost-effective equipment. At the same time, we are committed to water saving, energy saving, optimizing the equipment modification, reduce operations costs for cans manufacture.
Company adhere to quality and product innovation, steady development. Leading technology and reliable quality is our consistent aim.
Customer requirement is always No.1. Taking the market as the guidance, scientific and technological innovation as the backing, PPE collected a batch of high-level, high-quality professionals, design and manufacture of the products reached the international advanced level.
